Devacron.com

UDOO NEO

 

UDOO NEO is an open hardware low-cost computer equipped with a FreescaleTM i.MX 6SoloX applications processor for Android and Linux. The processor embeds an ARM® Cortex-M4 microcontroller which makes the board compatible with the Arduino environment allowing high performance at a low price. Ideal as a central element of more comprehensive projects, it easily enables the creation of a multitude of IoT applications, making the UDOO NEO even more innovative and appealing.

Full Specs

Processor Freescale™ i.MX 6SoloX with an embedded ARM Cortex-A9 core and a Cortex-M4 Core
Memory 512MB or 1GB DDR3 (only Plus version)
Graphics Integrated 2d/3d graphics controller
Video Out HDMI interface
LVDS interface + touch (I2C signals)
Video In Analog camera connection supporting NTSC and PAL
8-bit parallel camera interface*
Mass Storage NOR SPI Flash onboard
MicroSD card slot onboard
8-bit SDIO interface*
Audio HDMI audio transmitter
USB 1x USB 2.0 Type A ports
1x USB OTG (micro-AB connector)
Networking Fast ethernet RJ45 (10/100Mbps)
Wi-Fi 802.11 b/g/n, Bluetooth 4.0 Low Energy
Wi-Fi Direct Mode SmartConfig
Serial Ports 3x UART ports*
2x CAN Bus interfaces*
Other Interfaces 8x PWM signals*
1x I2C interface*
1x SPI interface*
6x multiplexable signals*
Power Supply 5 V DC Micro USB
6-15 V DC Power Jack
Coin Cell RTC Battery Connector
LEDs Green Power Status LED
User Configurable Red LED
Integrated Sensors 3-Axis Accelerometer
3-Axis Magnetometer
3-Axis Digital Gyroscope
Dimensions 85mm x59.3mm (3.35″ x 2.33″)
Arduino Pinout Arduino-Compatible through the standard Arduino Pins layout and compatible with Arduino shields.
Digital I/O Pins 36 available GPIOs
Analog Input Pins 6
Operating System Android & Linux
Exit mobile version